Help Desk (810) 955-4305
Certified Design Service - 810 -955-4305 Official Web Site for the Permanent Wood Foundation System
 

Excite
Hotbot
Infoseek
Lycos
Magellan
Webcrawler

PWFS
Woodbasement
TV17.org
Woodfoundation

 

 

 

 

Training for PWF
Energy &
Environmental
Building Association

Canadian Wood Council
Canadian Wood
Council

U of M
University Of
Minnesota

Southern Pine
Southern Pine
Council

APA Test Home
APA
Build A Better
Home

State of Michigan Training
Act 54
Michigan


Materials and Design Service



Be It Known That The Custom Design

For The Permanent Wood Foundation Plan

Referred To As Designed For:

_______________________________________________________
Name - Address -
City or Township & State

Has been Custom Designed in accordance with: All current Building Code Standards

Technical Report No. 7 of American Forest & Paper Association

National Design Specification for Wood Construction of AF&PA

Plywood Design Specification of American Plywood Association

Standard C22 of American Wood Preservers Association

Minimum Design Loads for Buildings and Other Structures of
American Society of Civil Engineers


The Permanent Wood Foundation named above is a well thought out custom structural Design. The Designer whose name and signature appears below bears full responsibility ONLY for the Design of the Permanent Wood Foundation including its Floor/Ceiling Nailing Assembly. The Installer shall entirely bear the responsibility for following ALL the Details of the Design for the construction of this Permanent Wood Foundation. Any Deviation from the Design named above requires the written consent of the Designer. If the foundation is a Panel foundation, Have the panel company sign and take full responsibility for the panel design and performance.

 

 

 


 

Note: Panel foundations can be site built or made in a shop. When made so it cover up items that need inspection by the Building Inspector. Third Party Inspection may be required. (inspect for grade stamps, treatment stamps, stud spacing, insulation, nailing, dip of saw cuts, plywood requirments are some of the item that a third party inspection will note.

All Panel Wood Foundations must be designed and installed in accordance with:
All current Building Codes Standards

While wood foundations are easy to build, this is only true if one is building from an accurate well designed plan. When such a plan is incorrect, or if something is left out of the plan or absent, or if a design is made using a guide manual (these are not design manuals); major mistakes can be made during the construction process. These errors cause problems for the owner, builder, and the building department.


Woodbasement.com a service of Permanent Wood Foundation System (PWF), supported by Southern Pine lumber users affiliated with the training and installation of wood foundations.
. .


 



Legal Disclaimer

Designed, Produced and Hosted by PWFS.com
The Official web site for the Permanent Wood Foundation System.